Around the Nation
6:04 am
Sun November 17, 2013

Bike Evangelist Wants To Put More Riders In The Low Seat

Originally published on Mon November 18, 2013 10:24 am

After several knee operations, 66-year-old Marilyn Cowser of Greenfield, Wis., found herself no longer able to Rollerblade or ride her bike.

She was advised to try a recumbent bike, but when Cowser went to her local bike shop, she found they were selling for upwards of $1,500. Cowser wasn't willing to spend that kind of money, so she went to see a guy about a half-hour away who builds recumbents in his garage.

"When I got there, he had them all out," she says. "And I got on this one and took off. I mean, I just went."

Cowser bought a white, refurbished 10-speed recumbent for just $400 from Recycled Recumbents in Glendale, Wis. Cowser says she's been converted to the recumbent way of cycling.

"I just love it," she says. "That's all I can say. It was one of the best purchases. I see myself riding this bike well into my 70s."

Because Biking Shouldn't Be Painful

Andrew Duncan Carson runs Recycled Recumbents entirely from his home garage. Cut-up sections of bicycle frames hang from the rafters, a plastic 5-gallon bucket filled with bike forks sits near a messy workbench and visitors will notice a 500-foot roll of bicycle chain.

A shower of sparks spills onto the garage floor as Carson cuts the rear triangle of an upright bike frame with an angle grinder. Carson is more than just a maker of recumbents; he's an evangelist for them.

"The truth of riding an upright bicycle for most of us is that it hurts," Carson says. "It hurts where the sun don't shine. I never got completely happy on my upright bike. It always hurt. And I thought that part of bicycling was dealing with the pain and in fact it was [because I was] on an upright bike."

Carson noticed a fair number of cyclists pedaling recumbents around Wisconsin. It got him thinking about riding his upright bike.

"I saw one of these things and I said, 'Maybe it's time to think outside the box a little bit. That looks awfully comfortable.' Then I went into a store and said, 'That looks awfully expensive.'"

Carson decided to build his own recumbent bike and found instructions online. Those instructions required some welding, but that was something that Carson, a jack of all trades, already knew how to do.

He rode his homemade recumbent on a two-day charity ride up the West Coast of Lake Michigan, and at the end of the first day he had a real aha moment.

"I got up there, and I said, 'You know, I'm tired. I've been 75 miles today but nothing hurts. I'm sweaty, but I could do another 50 miles today,' " Carson says. "It was that significant a difference that told me I would never ride an upright bike again."

Carson wanted to share that experience with others. He's built close to 500 recycled recumbents in the last 10 years. Most of them sell for sell for $700 or $800 — half of what they cost in stores.

Falling In Love, With A Bike

It's unclear whether this is a profit-making enterprise or simply a labor of love. It takes him about a week to make each bicycle, and there's also the cost of acquiring the used bikes he cannibalizes and paying a painter to powder coat the newly created frames.

"For me, it's always been about access," he says. "First my own access. How do I get there without spending four figures? And then, how do I help other people get there?"

First-time riders tend to be overwhelmed by how natural it feels to sit back in a recumbent. But riders also feel vulnerable until they adapt to a whole new way of balancing.

"On a bike, you are using that saddle between your legs to control the bike," Carson says. "You're pivoting your hips. You don't use your hips on a recumbent; you're trapped in that seat. Comfortably trapped, mind you, but you are trapped. So you are using your shoulders a bit more, your arms, and of course, profoundly different from the upright bike is the fact that you can't stand up."

Mike McKeough of Grafton, Wis., bought a recycled recumbent. The 58-year-old says that initially he fell down a lot, but after he got the hang of it, he says he fell in love with recumbent cycling.

"Everybody says recumbent cyclists are always smiling," McKeough says. "It's true."

McKeough now owns three recumbents.

"People look at you," he says. "Little kids point at you, you know. You feel a little special when you're riding one. It's neat."

Jon Kalish is a Manhattan-based radio reporter, newspaper writer and podcast producer.

Copyright 2013 NPR. To see more, visit http://www.npr.org/.

Transcript

RACHEL MARTIN, HOST:

So you may have seen people riding bicycles in a somewhat reclining position. Those are recumbent bikes. And these cyclists say leaning back in the seat with your legs extended in front of you is actually more comfortable than pedaling a traditional bike. But recumbents are also more expensive. So a man in Wisconsin has been working to make them more affordable. He's recycling traditional bike frames and turning them into recumbents.

Jon Kalish reports.

JON KALISH, BYLINE: After several operations on her knee, 66-year-old Marilyn Cowser of Greenfield, Wisconsin found herself no longer able to rollerblade or ride her bike. She was advised to try a recumbent bike. But when Cowser went to her local bike shop, she found that they were selling for upwards of $1500. Cowser wasn't willing to spend that kind of money, so she went to see a guy about a half-hour away who builds recumbents in his garage.

MARILYN COWSER: When I got there, he had them all out. And I got on this one and took off. I mean I just went.

KALISH: Marilyn Cowser bought a white refurbished 10-speed recumbent for just $400 from Recycled Recumbents in Glendale, Wisconsin. Cowser says she's been converted to the recumbent way of cycling.

COWSER: I just love it. That's all I can say. It was one of the best purchases. I see myself riding this bike well into my 70s.

KALISH: Recycled Recumbents is run out of a home garage. Cut-up sections of bicycle frames hang from the rafters, a plastic five-gallon bucket filled with bike forks sits near a messy workbench and visitors will notice there's a 500-foot roll of bicycle chain in the garage. This is the bike building workshop of Andrew Duncan Carson. Everyone calls him A.D.

(SOUNDBITE OF CUTTING METAL)

KALISH: A shower of sparks spills on to the garage floor as Carson cuts the rear triangle of an upright bike frame with an angle grinder. Carson is more than just a maker of recumbents, he's an evangelist for them.

ANDREW DUNCAN CARSON: The truth of riding an upright bicycle for most of us is that it hurts. It hurts where the sun don't shine. I never got completely happy on my upright bike. It always hurt. I thought that part of bicycling was dealing with the pain and in fact it was on an upright bike.

KALISH: Carson noticed a fair number of recumbents being pedaled around Wisconsin. It got him thinking about riding his upright bike.

CARSON: I saw one of these things and I said maybe it's time to think outside the box a little bit. That looks awfully comfortable. Then I went into a store and said that looks awfully expensive.

KALISH: So, A.D. Carson decided to build his own recumbent bike and found instructions online. Those instructions required some welding but that was something that Carson, a jack of all trades, already knew how to do. He rode it on a two-day charity ride up the west coast of Lake Michigan and at the end of the first day he had a real aha moment.

CARSON: I got up there and I said, you know, I'm tired. I've been 75 miles today but nothing hurts. I'm sweaty. But I could do another 50 miles today. It was that significant a difference that told me I would never ride an upright bike again.

KALISH: Carson wanted to share that experience with others. He's built close to 500 recumbents in the last 10 years. Most of them sell for sell for $700 or 800, half of what they cost in stores. It's unclear whether this is a profit-making enterprise or simply a labor of love. It takes him about a week to make each bicycle and there's also the cost of acquiring the used bikes he cannibalizes and paying a painter to powder coat the newly created frames.

CARSON: For me, it's always been about access. First, my own access. How do I get there without spending four figures? And then how do I help other people get there?

KALISH: First time riders, including this reporter, tend to be overwhelmed by both how natural it feels to sit back in a recumbent. But you also feel vulnerable until you adapt to a whole new way of balancing.

(SOUNDBITE OF BICYCLE ROLLING)

CARSON: On a bike, you are using that saddle between your legs to control the bike and you're pivoting your hips. You don't use your hips on a recumbent, you're trapped in that seat - comfortably trapped mind you but you are trapped. So, you are using your shoulders a bit more, your arms, and of course, profoundly different from the upright bike is the fact that you can't stand up.

KALISH: Fifty-eight-year-old Mike McKeough of Grafton, Wisconsin bought a Recycled Recumbent. McKeough says that initially he fell down a lot. But after he got the hang of it, he says he fell in love with recumbent cycling.

MIKE MCKEOUGH: Everybody says recumbent cyclists are always smiling. It's true.

KALISH: McKeough now owns three recumbents.

MCKEOUGH: People look at you. Little kids point at you, you know. You feel a little special when you're riding one. It's neat.

KALISH: Recycled Recumbents sells kits for those who want to build their own bike. A.D. Carson says getting a photo from someone who built their own bike is as rewarding as selling a recumbent he builds. For NPR News, I'm Jon Kalish.

(SOUNDBITE OF MUSIC)

MARTIN: And you're listening to WEEKEND EDITION from NPR News. Transcript provided by NPR, Copyright NPR.